xdg_shell_unstable_v5 Module¶
XdgPopup¶
-
class
pywayland.protocol.xdg_shell_unstable_v5.
XdgPopup
¶ Short-lived, popup surfaces for menus
A popup surface is a short-lived, temporary surface that can be used to implement menus. It takes an explicit grab on the surface that will be dismissed when the user dismisses the popup. This can be done by the user clicking outside the surface, using the keyboard, or even locking the screen through closing the lid or a timeout.
When the popup is dismissed, a popup_done event will be sent out, and at the same time the surface will be unmapped. The
XdgPopup
object is now inert and cannot be reactivated, so clients should destroy it. Explicitly destroying theXdgPopup
object will also dismiss the popup and unmap the surface.Clients will receive events for all their surfaces during this grab (which is an “owner-events” grab in X11 parlance). This is done so that users can navigate through submenus and other “nested” popup windows without having to dismiss the topmost popup.
Clients that want to dismiss the popup when another surface of their own is clicked should dismiss the popup using the destroy request.
The parent surface must have either an
XdgSurface
orXdgPopup
role.Specifying an
XdgPopup
for the parent means that the popups are nested, with this popup now being the topmost popup. Nested popups must be destroyed in the reverse order they were created in, e.g. the only popup you are allowed to destroy at all times is the topmost one.If there is an existing popup when creating a new popup, the parent must be the current topmost popup.
A parent surface must be mapped before the new popup is mapped.
When compositors choose to dismiss a popup, they will likely dismiss every nested popup as well. When a compositor dismisses popups, it will follow the same dismissing order as required from the client.
The x and y arguments passed when creating the popup object specify where the top left of the popup should be placed, relative to the local surface coordinates of the parent surface. See
XdgShell.get_xdg_popup()
.The client must call
WlSurface.commit()
on the correspondingWlSurface
for theXdgPopup
state to take effect.For a surface to be mapped by the compositor the client must have committed both the
XdgPopup
state and a buffer.
XdgShell¶
-
class
pywayland.protocol.xdg_shell_unstable_v5.
XdgShell
¶ Create desktop-style surfaces
XdgShell
allows clients to turn aWlSurface
into a “real window” which can be dragged, resized, stacked, and moved around by the user. Everything about this interface is suited towards traditional desktop environments.-
destroy
()¶ Request – opcode 0 (attached to
Resource
instance)Destroy
XdgShell
Destroy this
XdgShell
object.Destroying a bound
XdgShell
object while there are surfaces still alive created by thisXdgShell
object instance is illegal and will result in a protocol error.
-
use_unstable_version
(version)¶ Request – opcode 1 (attached to
Resource
instance)Enable use of this unstable version
Negotiate the unstable version of the interface. This mechanism is in place to ensure client and server agree on the unstable versions of the protocol that they speak or exit cleanly if they don’t agree. This request will go away once the xdg-shell protocol is stable.
Parameters: version (ArgumentType.Int) –
-
get_xdg_surface
(surface)¶ Request – opcode 2 (attached to
Resource
instance)Create a shell surface from a surface
This creates an
XdgSurface
for the given surface and gives it theXdgSurface
role. AWlSurface
can only be given anXdgSurface
role once. If get_xdg_surface is called with aWlSurface
that already has an activeXdgSurface
associated with it, or if it had any other role, an error is raised.See the documentation of
XdgSurface
for more details about what anXdgSurface
is and how it is used.Parameters: surface ( WlSurface
) –Returns: XdgSurface
-
get_xdg_popup
(surface, parent, seat, serial, x, y)¶ Request – opcode 3 (attached to
Resource
instance)Create a popup for a surface
This creates an
XdgPopup
for the given surface and gives it theXdgPopup
role. AWlSurface
can only be given anXdgPopup
role once. If get_xdg_popup is called with aWlSurface
that already has an activeXdgPopup
associated with it, or if it had any other role, an error is raised.This request must be used in response to some sort of user action like a button press, key press, or touch down event.
See the documentation of
XdgPopup
for more details about what anXdgPopup
is and how it is used.Parameters: Returns:
-
pong
(serial)¶ Request – opcode 4 (attached to
Resource
instance)Respond to a ping event
A client must respond to a ping event with a pong request or the client may be deemed unresponsive.
Parameters: serial (ArgumentType.Uint) – serial of the ping event
-
ping
(serial)¶ Event – opcode 0 (attached to
Proxy
instance)Check if the client is alive
The ping event asks the client if it’s still alive. Pass the serial specified in the event back to the compositor by sending a “pong” request back with the specified serial.
Compositors can use this to determine if the client is still alive. It’s unspecified what will happen if the client doesn’t respond to the ping request, or in what timeframe. Clients should try to respond in a reasonable amount of time.
A compositor is free to ping in any way it wants, but a client must always respond to any
XdgShell
object it created.Parameters: serial (ArgumentType.Uint) – pass this to the pong request
-
XdgSurface¶
-
class
pywayland.protocol.xdg_shell_unstable_v5.
XdgSurface
¶ A desktop window
An interface that may be implemented by a
WlSurface
, for implementations that provide a desktop-style user interface.It provides requests to treat surfaces like windows, allowing to set properties like maximized, fullscreen, minimized, and to move and resize them, and associate metadata like title and app id.
The client must call
WlSurface.commit()
on the correspondingWlSurface
for theXdgSurface
state to take effect. Prior to committing the new state, it can set up initial configuration, such as maximizing or setting a window geometry.Even without attaching a buffer the compositor must respond to initial committed configuration, for instance sending a configure event with expected window geometry if the client maximized its surface during initialization.
For a surface to be mapped by the compositor the client must have committed both an
XdgSurface
state and a buffer.-
destroy
()¶ Request – opcode 0 (attached to
Resource
instance)Destroy the
XdgSurface
Unmap and destroy the window. The window will be effectively hidden from the user’s point of view, and all state like maximization, fullscreen, and so on, will be lost.
-
set_parent
(parent)¶ Request – opcode 1 (attached to
Resource
instance)Set the parent of this surface
Set the “parent” of this surface. This window should be stacked above a parent. The parent surface must be mapped as long as this surface is mapped.
Parent windows should be set on dialogs, toolboxes, or other “auxiliary” surfaces, so that the parent is raised when the dialog is raised.
Parameters: parent ( XdgSurface
or None) –
-
set_title
(title)¶ Request – opcode 2 (attached to
Resource
instance)Set surface title
Set a short title for the surface.
This string may be used to identify the surface in a task bar, window list, or other user interface elements provided by the compositor.
The string must be encoded in UTF-8.
Parameters: title (ArgumentType.String) –
-
set_app_id
(app_id)¶ Request – opcode 3 (attached to
Resource
instance)Set application id
Set an application identifier for the surface.
The app ID identifies the general class of applications to which the surface belongs. The compositor can use this to group multiple surfaces together, or to determine how to launch a new application.
For D-Bus activatable applications, the app ID is used as the D-Bus service name.
The compositor shell will try to group application surfaces together by their app ID. As a best practice, it is suggested to select app ID’s that match the basename of the application’s .desktop file. For example, “org.freedesktop.FooViewer” where the .desktop file is “org.freedesktop.FooViewer.desktop”.
See the desktop-entry specification [0] for more details on application identifiers and how they relate to well-known D-Bus names and .desktop files.
[0] http://standards.freedesktop.org/desktop-entry-spec/
Parameters: app_id (ArgumentType.String) –
Request – opcode 4 (attached to
Resource
instance)Show the window menu
Clients implementing client-side decorations might want to show a context menu when right-clicking on the decorations, giving the user a menu that they can use to maximize or minimize the window.
This request asks the compositor to pop up such a window menu at the given position, relative to the local surface coordinates of the parent surface. There are no guarantees as to what menu items the window menu contains.
This request must be used in response to some sort of user action like a button press, key press, or touch down event.
Parameters:
-
move
(seat, serial)¶ Request – opcode 5 (attached to
Resource
instance)Start an interactive move
Start an interactive, user-driven move of the surface.
This request must be used in response to some sort of user action like a button press, key press, or touch down event. The passed serial is used to determine the type of interactive move (touch, pointer, etc).
The server may ignore move requests depending on the state of the surface (e.g. fullscreen or maximized), or if the passed serial is no longer valid.
If triggered, the surface will lose the focus of the device (
WlPointer
,WlTouch
, etc) used for the move. It is up to the compositor to visually indicate that the move is taking place, such as updating a pointer cursor, during the move. There is no guarantee that the device focus will return when the move is completed.Parameters:
-
resize
(seat, serial, edges)¶ Request – opcode 6 (attached to
Resource
instance)Start an interactive resize
Start a user-driven, interactive resize of the surface.
This request must be used in response to some sort of user action like a button press, key press, or touch down event. The passed serial is used to determine the type of interactive resize (touch, pointer, etc).
The server may ignore resize requests depending on the state of the surface (e.g. fullscreen or maximized).
If triggered, the client will receive configure events with the “resize” state enum value and the expected sizes. See the “resize” enum value for more details about what is required. The client must also acknowledge configure events using “ack_configure”. After the resize is completed, the client will receive another “configure” event without the resize state.
If triggered, the surface also will lose the focus of the device (
WlPointer
,WlTouch
, etc) used for the resize. It is up to the compositor to visually indicate that the resize is taking place, such as updating a pointer cursor, during the resize. There is no guarantee that the device focus will return when the resize is completed.The edges parameter specifies how the surface should be resized, and is one of the values of the resize_edge enum. The compositor may use this information to update the surface position for example when dragging the top left corner. The compositor may also use this information to adapt its behavior, e.g. choose an appropriate cursor image.
Parameters:
-
ack_configure
(serial)¶ Request – opcode 7 (attached to
Resource
instance)Ack a configure event
When a configure event is received, if a client commits the surface in response to the configure event, then the client must make an ack_configure request sometime before the commit request, passing along the serial of the configure event.
For instance, the compositor might use this information to move a surface to the top left only when the client has drawn itself for the maximized or fullscreen state.
If the client receives multiple configure events before it can respond to one, it only has to ack the last configure event.
A client is not required to commit immediately after sending an ack_configure request - it may even ack_configure several times before its next surface commit.
The compositor expects that the most recently received ack_configure request at the time of a commit indicates which configure event the client is responding to.
Parameters: serial (ArgumentType.Uint) – the serial from the configure event
-
set_window_geometry
(x, y, width, height)¶ Request – opcode 8 (attached to
Resource
instance)Set the new window geometry
The window geometry of a window is its “visible bounds” from the user’s perspective. Client-side decorations often have invisible portions like drop-shadows which should be ignored for the purposes of aligning, placing and constraining windows.
The window geometry is double buffered, and will be applied at the time
WlSurface.commit()
of the correspondingWlSurface
is called.Once the window geometry of the surface is set once, it is not possible to unset it, and it will remain the same until set_window_geometry is called again, even if a new subsurface or buffer is attached.
If never set, the value is the full bounds of the surface, including any subsurfaces. This updates dynamically on every commit. This unset mode is meant for extremely simple clients.
If responding to a configure event, the window geometry in here must respect the sizing negotiations specified by the states in the configure event.
The arguments are given in the surface local coordinate space of the
WlSurface
associated with thisXdgSurface
.The width and height must be greater than zero.
Parameters: - x (ArgumentType.Int) –
- y (ArgumentType.Int) –
- width (ArgumentType.Int) –
- height (ArgumentType.Int) –
-
set_maximized
()¶ Request – opcode 9 (attached to
Resource
instance)Maximize the window
Maximize the surface.
After requesting that the surface should be maximized, the compositor will respond by emitting a configure event with the “maximized” state and the required window geometry. The client should then update its content, drawing it in a maximized state, i.e. without shadow or other decoration outside of the window geometry. The client must also acknowledge the configure when committing the new content (see ack_configure).
It is up to the compositor to decide how and where to maximize the surface, for example which output and what region of the screen should be used.
If the surface was already maximized, the compositor will still emit a configure event with the “maximized” state.
-
unset_maximized
()¶ Request – opcode 10 (attached to
Resource
instance)Unmaximize the window
Unmaximize the surface.
After requesting that the surface should be unmaximized, the compositor will respond by emitting a configure event without the “maximized” state. If available, the compositor will include the window geometry dimensions the window had prior to being maximized in the configure request. The client must then update its content, drawing it in a regular state, i.e. potentially with shadow, etc. The client must also acknowledge the configure when committing the new content (see ack_configure).
It is up to the compositor to position the surface after it was unmaximized; usually the position the surface had before maximizing, if applicable.
If the surface was already not maximized, the compositor will still emit a configure event without the “maximized” state.
-
set_fullscreen
(output)¶ Request – opcode 11 (attached to
Resource
instance)Set the window as fullscreen on a monitor
Make the surface fullscreen.
You can specify an output that you would prefer to be fullscreen. If this value is NULL, it’s up to the compositor to choose which display will be used to map this surface.
If the surface doesn’t cover the whole output, the compositor will position the surface in the center of the output and compensate with black borders filling the rest of the output.
Parameters: output ( WlOutput
or None) –
-
unset_fullscreen
()¶ Request – opcode 12 (attached to
Resource
instance)unset_fullscreen
-
set_minimized
()¶ Request – opcode 13 (attached to
Resource
instance)Set the window as minimized
Request that the compositor minimize your surface. There is no way to know if the surface is currently minimized, nor is there any way to unset minimization on this surface.
If you are looking to throttle redrawing when minimized, please instead use the
WlSurface.frame()
event for this, as this will also work with live previews on windows in Alt-Tab, Expose or similar compositor features.
-
configure
(width, height, states, serial)¶ Event – opcode 0 (attached to
Proxy
instance)Suggest a surface change
The configure event asks the client to resize its surface or to change its state.
The width and height arguments specify a hint to the window about how its surface should be resized in window geometry coordinates. See set_window_geometry.
If the width or height arguments are zero, it means the client should decide its own window dimension. This may happen when the compositor need to configure the state of the surface but doesn’t have any information about any previous or expected dimension.
The states listed in the event specify how the width/height arguments should be interpreted, and possibly how it should be drawn.
Clients should arrange their surface for the new size and states, and then send a ack_configure request with the serial sent in this configure event at some point before committing the new surface.
If the client receives multiple configure events before it can respond to one, it is free to discard all but the last event it received.
Parameters: - width (ArgumentType.Int) –
- height (ArgumentType.Int) –
- states (ArgumentType.Array) –
- serial (ArgumentType.Uint) –
-
close
()¶ Event – opcode 1 (attached to
Proxy
instance)Surface wants to be closed
The close event is sent by the compositor when the user wants the surface to be closed. This should be equivalent to the user clicking the close button in client-side decorations, if your application has any…
This is only a request that the user intends to close your window. The client may choose to ignore this request, or show a dialog to ask the user to save their data…
-