tablet_unstable_v2 Module¶
ZwpTabletManagerV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletManagerV2
¶ Controller object for graphic tablet devices
An object that provides access to the graphics tablets available on this system. All tablets are associated with a seat, to get access to the actual tablets, use wp_tablet_manager.get_tablet_seat.
-
get_tablet_seat
(seat)¶ Request – opcode 0 (attached to
Resource
instance)Get the tablet seat
Get the wp_tablet_seat object for the given seat. This object provides access to all graphics tablets in this seat.
Parameters: seat ( WlSeat
) – TheWlSeat
object to retrieve the tablets forReturns: ZwpTabletSeatV2
-
destroy
()¶ Request – opcode 1 (attached to
Resource
instance)Release the memory for the tablet manager object
Destroy the wp_tablet_manager object. Objects created from this object are unaffected and should be destroyed separately.
-
ZwpTabletPadV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletPadV2
¶ A set of buttons, rings and strips
A pad device is a set of buttons, rings and strips usually physically present on the tablet device itself. Some exceptions exist where the pad device is physically detached, e.g. the Wacom ExpressKey Remote.
Pad devices have no axes that control the cursor and are generally auxiliary devices to the tool devices used on the tablet surface.
A pad device has a number of static characteristics, e.g. the number of rings. These capabilities are sent in an event sequence after the wp_tablet_seat.pad_added event before any actual events from this pad. This initial event sequence is terminated by a wp_tablet_pad.done event.
All pad features (buttons, rings and strips) are logically divided into groups and all pads have at least one group. The available groups are notified through the wp_tablet_pad.group event; the compositor will emit one event per group before emitting wp_tablet_pad.done.
Groups may have multiple modes. Modes allow clients to map multiple actions to a single pad feature. Only one mode can be active per group, although different groups may have different active modes.
-
set_feedback
(button, description, serial)¶ Request – opcode 0 (attached to
Resource
instance)Set compositor feedback
Requests the compositor to use the provided feedback string associated with this button. This request should be issued immediately after a wp_tablet_pad_group.mode_switch event from the corresponding group is received, or whenever a button is mapped to a different action. See wp_tablet_pad_group.mode_switch for more details.
Clients are encouraged to provide context-aware descriptions for the actions associated with each button, and compositors may use this information to offer visual feedback on the button layout (e.g. on- screen displays).
Button indices start at 0. Setting the feedback string on a button that is reserved by the compositor (i.e. not belonging to any wp_tablet_pad_group) does not generate an error but the compositor is free to ignore the request.
The provided string ‘description’ is a UTF-8 encoded string to be associated with this ring, and is considered user-visible; general internationalization rules apply.
The serial argument will be that of the last wp_tablet_pad_group.mode_switch event received for the group of this button. Requests providing other serials than the most recent one will be ignored.
Parameters: - button (ArgumentType.Uint) – button index
- description (ArgumentType.String) – button description
- serial (ArgumentType.Uint) – serial of the mode switch event
-
destroy
()¶ Request – opcode 1 (attached to
Resource
instance)Destroy the pad object
Destroy the wp_tablet_pad object. Objects created from this object are unaffected and should be destroyed separately.
-
group
(pad_group)¶ Event – opcode 0 (attached to
Proxy
instance)Group announced
Sent on wp_tablet_pad initialization to announce available groups. One event is sent for each pad group available.
This event is sent in the initial burst of events before the wp_tablet_pad.done event. At least one group will be announced.
Parameters: pad_group ( ZwpTabletPadGroupV2
) –
-
path
(path)¶ Event – opcode 1 (attached to
Proxy
instance)Path to the device
A system-specific device path that indicates which device is behind this wp_tablet_pad. This information may be used to gather additional information about the device, e.g. through libwacom.
The format of the path is unspecified, it may be a device node, a sysfs path, or some other identifier. It is up to the client to identify the string provided.
This event is sent in the initial burst of events before the wp_tablet_pad.done event.
Parameters: path (ArgumentType.String) – path to local device
Event – opcode 2 (attached to
Proxy
instance)Buttons announced
Sent on wp_tablet_pad initialization to announce the available buttons.
This event is sent in the initial burst of events before the wp_tablet_pad.done event. This event is only sent when at least one button is available.
Parameters: buttons (ArgumentType.Uint) – the number of buttons
-
done
()¶ Event – opcode 3 (attached to
Proxy
instance)Pad description event sequence complete
This event signals the end of the initial burst of descriptive events. A client may consider the static description of the pad to be complete and finalize initialization of the pad.
Event – opcode 4 (attached to
Proxy
instance)Physical button state
Sent whenever the physical state of a button changes.
Parameters: - time (ArgumentType.Uint) – the time of the event with millisecond granularity
- button (ArgumentType.Uint) – the index of the button that changed state
- state (ArgumentType.Uint) –
-
enter
(serial, tablet, surface)¶ Event – opcode 5 (attached to
Proxy
instance)Enter event
Notification that this pad is focused on the specified surface.
Parameters: - serial (ArgumentType.Uint) – serial number of the enter event
- tablet (
ZwpTabletV2
) – the tablet the pad is attached to - surface (
WlSurface
) – surface the pad is focused on
-
leave
(serial, surface)¶ Event – opcode 6 (attached to
Proxy
instance)Enter event
Notification that this pad is no longer focused on the specified surface.
Parameters: - serial (ArgumentType.Uint) – serial number of the leave event
- surface (
WlSurface
) – surface the pad is no longer focused on
-
removed
()¶ Event – opcode 7 (attached to
Proxy
instance)Pad removed event
Sent when the pad has been removed from the system. When a tablet is removed its pad(s) will be removed too.
When this event is received, the client must destroy all rings, strips and groups that were offered by this pad, and issue wp_tablet_pad.destroy the pad itself.
-
ZwpTabletPadGroupV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletPadGroupV2
¶ A set of buttons, rings and strips
A pad group describes a distinct (sub)set of buttons, rings and strips present in the tablet. The criteria of this grouping is usually positional, eg. if a tablet has buttons on the left and right side, 2 groups will be presented. The physical arrangement of groups is undisclosed and may change on the fly.
Pad groups will announce their features during pad initialization. Between the corresponding wp_tablet_pad.group event and wp_tablet_pad_group.done, the pad group will announce the buttons, rings and strips contained in it, plus the number of supported modes.
Modes are a mechanism to allow multiple groups of actions for every element in the pad group. The number of groups and available modes in each is persistent across device plugs. The current mode is user-switchable, it will be announced through the wp_tablet_pad_group.mode_switch event both whenever it is switched, and after wp_tablet_pad.enter.
The current mode logically applies to all elements in the pad group, although it is at clients’ discretion whether to actually perform different actions, and/or issue the respective .set_feedback requests to notify the compositor. See the wp_tablet_pad_group.mode_switch event for more details.
-
destroy
()¶ Request – opcode 0 (attached to
Resource
instance)Destroy the pad object
Destroy the wp_tablet_pad_group object. Objects created from this object are unaffected and should be destroyed separately.
Event – opcode 0 (attached to
Proxy
instance)Buttons announced
Sent on wp_tablet_pad_group initialization to announce the available buttons in the group. Button indices start at 0, a button may only be in one group at a time.
This event is first sent in the initial burst of events before the wp_tablet_pad_group.done event.
Some buttons are reserved by the compositor. These buttons may not be assigned to any wp_tablet_pad_group. Compositors may broadcast this event in the case of changes to the mapping of these reserved buttons. If the compositor happens to reserve all buttons in a group, this event will be sent with an empty array.
Parameters: buttons (ArgumentType.Array) – buttons in this group
-
ring
(ring)¶ Event – opcode 1 (attached to
Proxy
instance)Ring announced
Sent on wp_tablet_pad_group initialization to announce available rings. One event is sent for each ring available on this pad group.
This event is sent in the initial burst of events before the wp_tablet_pad_group.done event.
Parameters: ring ( ZwpTabletPadRingV2
) –
-
strip
(strip)¶ Event – opcode 2 (attached to
Proxy
instance)Strip announced
Sent on wp_tablet_pad initialization to announce available strips. One event is sent for each strip available on this pad group.
This event is sent in the initial burst of events before the wp_tablet_pad_group.done event.
Parameters: strip ( ZwpTabletPadStripV2
) –
-
modes
(modes)¶ Event – opcode 3 (attached to
Proxy
instance)Mode-switch ability announced
Sent on wp_tablet_pad_group initialization to announce that the pad group may switch between modes. A client may use a mode to store a specific configuration for buttons, rings and strips and use the wl_tablet_pad_group.mode_switch event to toggle between these configurations. Mode indices start at 0.
Switching modes is compositor-dependent. See the wp_tablet_pad_group.mode_switch event for more details.
This event is sent in the initial burst of events before the wp_tablet_pad_group.done event. This event is only sent when more than more than one mode is available.
Parameters: modes (ArgumentType.Uint) – the number of modes
-
done
()¶ Event – opcode 4 (attached to
Proxy
instance)Tablet group description events sequence complete
This event is sent immediately to signal the end of the initial burst of descriptive events. A client may consider the static description of the tablet to be complete and finalize initialization of the tablet group.
-
mode_switch
(time, serial, mode)¶ Event – opcode 5 (attached to
Proxy
instance)Mode switch event
Notification that the mode was switched.
A mode applies to all buttons, rings and strips in a group simultaneously, but a client is not required to assign different actions for each mode. For example, a client may have mode-specific button mappings but map the ring to vertical scrolling in all modes. Mode indices start at 0.
Switching modes is compositor-dependent. The compositor may provide visual cues to the client about the mode, e.g. by toggling LEDs on the tablet device. Mode-switching may be software-controlled or controlled by one or more physical buttons. For example, on a Wacom Intuos Pro, the button inside the ring may be assigned to switch between modes.
The compositor will also send this event after wp_tablet_pad.enter on each group in order to notify of the current mode. Groups that only feature one mode will use mode=0 when emitting this event.
If a button action in the new mode differs from the action in the previous mode, the client should immediately issue a wp_tablet_pad.set_feedback request for each changed button.
If a ring or strip action in the new mode differs from the action in the previous mode, the client should immediately issue a wp_tablet_ring.set_feedback or wp_tablet_strip.set_feedback request for each changed ring or strip.
Parameters: - time (ArgumentType.Uint) – the time of the event with millisecond granularity
- serial (ArgumentType.Uint) –
- mode (ArgumentType.Uint) – the new mode of the pad
-
ZwpTabletSeatV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletSeatV2
¶ Controller object for graphic tablet devices of a seat
An object that provides access to the graphics tablets available on this seat. After binding to this interface, the compositor sends a set of wp_tablet_seat.tablet_added and wp_tablet_seat.tool_added events.
-
destroy
()¶ Request – opcode 0 (attached to
Resource
instance)Release the memory for the tablet seat object
Destroy the wp_tablet_seat object. Objects created from this object are unaffected and should be destroyed separately.
-
tablet_added
(id)¶ Event – opcode 0 (attached to
Proxy
instance)New device notification
This event is sent whenever a new tablet becomes available on this seat. This event only provides the object id of the tablet, any static information about the tablet (device name, vid/pid, etc.) is sent through the wp_tablet interface.
Parameters: id ( ZwpTabletV2
) – the newly added graphics tablet
-
tool_added
(id)¶ Event – opcode 1 (attached to
Proxy
instance)A new tool has been used with a tablet
This event is sent whenever a tool that has not previously been used with a tablet comes into use. This event only provides the object id of the tool; any static information about the tool (capabilities, type, etc.) is sent through the wp_tablet_tool interface.
Parameters: id ( ZwpTabletToolV2
) – the newly added tablet tool
-
pad_added
(id)¶ Event – opcode 2 (attached to
Proxy
instance)New pad notification
This event is sent whenever a new pad is known to the system. Typically, pads are physically attached to tablets and a pad_added event is sent immediately after the wp_tablet_seat.tablet_added. However, some standalone pad devices logically attach to tablets at runtime, and the client must wait for wp_tablet_pad.enter to know the tablet a pad is attached to.
This event only provides the object id of the pad. All further features (buttons, strips, rings) are sent through the wp_tablet_pad interface.
Parameters: id ( ZwpTabletPadV2
) – the newly added pad
-
ZwpTabletPadRingV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletPadRingV2
¶ Pad ring
A circular interaction area, such as the touch ring on the Wacom Intuos Pro series tablets.
Events on a ring are logically grouped by the wl_tablet_pad_ring.frame event.
-
set_feedback
(description, serial)¶ Request – opcode 0 (attached to
Resource
instance)Set compositor feedback
Request that the compositor use the provided feedback string associated with this ring. This request should be issued immediately after a wp_tablet_pad_group.mode_switch event from the corresponding group is received, or whenever the ring is mapped to a different action. See wp_tablet_pad_group.mode_switch for more details.
Clients are encouraged to provide context-aware descriptions for the actions associated with the ring; compositors may use this information to offer visual feedback about the button layout (eg. on-screen displays).
The provided string ‘description’ is a UTF-8 encoded string to be associated with this ring, and is considered user-visible; general internationalization rules apply.
The serial argument will be that of the last wp_tablet_pad_group.mode_switch event received for the group of this ring. Requests providing other serials than the most recent one will be ignored.
Parameters: - description (ArgumentType.String) – ring description
- serial (ArgumentType.Uint) – serial of the mode switch event
-
destroy
()¶ Request – opcode 1 (attached to
Resource
instance)Destroy the ring object
This destroys the client’s resource for this ring object.
-
source
(source)¶ Event – opcode 0 (attached to
Proxy
instance)Ring event source
Source information for ring events.
This event does not occur on its own. It is sent before a wp_tablet_pad_ring.frame event and carries the source information for all events within that frame.
The source specifies how this event was generated. If the source is wp_tablet_pad_ring.source.finger, a wp_tablet_pad_ring.stop event will be sent when the user lifts the finger off the device.
This event is optional. If the source is unknown for an interaction, no event is sent.
Parameters: source (ArgumentType.Uint) – the event source
-
angle
(degrees)¶ Event – opcode 1 (attached to
Proxy
instance)Angle changed
Sent whenever the angle on a ring changes.
The angle is provided in degrees clockwise from the logical north of the ring in the pad’s current rotation.
Parameters: degrees (ArgumentType.Fixed) – the current angle in degrees
-
stop
()¶ Event – opcode 2 (attached to
Proxy
instance)Interaction stopped
Stop notification for ring events.
For some wp_tablet_pad_ring.source types, a wp_tablet_pad_ring.stop event is sent to notify a client that the interaction with the ring has terminated. This enables the client to implement kinetic scrolling. See the wp_tablet_pad_ring.source documentation for information on when this event may be generated.
Any wp_tablet_pad_ring.angle events with the same source after this event should be considered as the start of a new interaction.
-
frame
(time)¶ Event – opcode 3 (attached to
Proxy
instance)End of a ring event sequence
Indicates the end of a set of ring events that logically belong together. A client is expected to accumulate the data in all events within the frame before proceeding.
All wp_tablet_pad_ring events before a wp_tablet_pad_ring.frame event belong logically together. For example, on termination of a finger interaction on a ring the compositor will send a wp_tablet_pad_ring.source event, a wp_tablet_pad_ring.stop event and a wp_tablet_pad_ring.frame event.
A wp_tablet_pad_ring.frame event is sent for every logical event group, even if the group only contains a single wp_tablet_pad_ring event. Specifically, a client may get a sequence: angle, frame, angle, frame, etc.
Parameters: time (ArgumentType.Uint) – timestamp with millisecond granularity
-
ZwpTabletToolV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletToolV2
¶ A physical tablet tool
An object that represents a physical tool that has been, or is currently in use with a tablet in this seat. Each wp_tablet_tool object stays valid until the client destroys it; the compositor reuses the wp_tablet_tool object to indicate that the object’s respective physical tool has come into proximity of a tablet again.
A wp_tablet_tool object’s relation to a physical tool depends on the tablet’s ability to report serial numbers. If the tablet supports this capability, then the object represents a specific physical tool and can be identified even when used on multiple tablets.
A tablet tool has a number of static characteristics, e.g. tool type, hardware_serial and capabilities. These capabilities are sent in an event sequence after the wp_tablet_seat.tool_added event before any actual events from this tool. This initial event sequence is terminated by a wp_tablet_tool.done event.
Tablet tool events are grouped by wp_tablet_tool.frame events. Any events received before a wp_tablet_tool.frame event should be considered part of the same hardware state change.
-
set_cursor
(serial, surface, hotspot_x, hotspot_y)¶ Request – opcode 0 (attached to
Resource
instance)Set the tablet tool’s surface
Sets the surface of the cursor used for this tool on the given tablet. This request only takes effect if the tool is in proximity of one of the requesting client’s surfaces or the surface parameter is the current pointer surface. If there was a previous surface set with this request it is replaced. If surface is NULL, the cursor image is hidden.
The parameters hotspot_x and hotspot_y define the position of the pointer surface relative to the pointer location. Its top-left corner is always at (x, y) - (hotspot_x, hotspot_y), where (x, y) are the coordinates of the pointer location, in surface-local coordinates.
On surface.attach requests to the pointer surface, hotspot_x and hotspot_y are decremented by the x and y parameters passed to the request. Attach must be confirmed by
WlSurface.commit()
as usual.The hotspot can also be updated by passing the currently set pointer surface to this request with new values for hotspot_x and hotspot_y.
The current and pending input regions of the
WlSurface
are cleared, andWlSurface.set_input_region()
is ignored until theWlSurface
is no longer used as the cursor. When the use as a cursor ends, the current and pending input regions become undefined, and theWlSurface
is unmapped.This request gives the surface the role of a wp_tablet_tool cursor. A surface may only ever be used as the cursor surface for one wp_tablet_tool. If the surface already has another role or has previously been used as cursor surface for a different tool, a protocol error is raised.
Parameters: - serial (ArgumentType.Uint) – serial of the enter event
- surface (
WlSurface
or None) – - hotspot_x (ArgumentType.Int) – surface-local x coordinate
- hotspot_y (ArgumentType.Int) – surface-local y coordinate
-
destroy
()¶ Request – opcode 1 (attached to
Resource
instance)Destroy the tool object
This destroys the client’s resource for this tool object.
-
type
(tool_type)¶ Event – opcode 0 (attached to
Proxy
instance)Tool type
The tool type is the high-level type of the tool and usually decides the interaction expected from this tool.
This event is sent in the initial burst of events before the wp_tablet_tool.done event.
Parameters: tool_type (ArgumentType.Uint) – the physical tool type
-
hardware_serial
(hardware_serial_hi, hardware_serial_lo)¶ Event – opcode 1 (attached to
Proxy
instance)Unique hardware serial number of the tool
If the physical tool can be identified by a unique 64-bit serial number, this event notifies the client of this serial number.
If multiple tablets are available in the same seat and the tool is uniquely identifiable by the serial number, that tool may move between tablets.
Otherwise, if the tool has no serial number and this event is missing, the tool is tied to the tablet it first comes into proximity with. Even if the physical tool is used on multiple tablets, separate wp_tablet_tool objects will be created, one per tablet.
This event is sent in the initial burst of events before the wp_tablet_tool.done event.
Parameters: - hardware_serial_hi (ArgumentType.Uint) – the unique serial number of the tool, most significant bits
- hardware_serial_lo (ArgumentType.Uint) – the unique serial number of the tool, least significant bits
-
hardware_id_wacom
(hardware_id_hi, hardware_id_lo)¶ Event – opcode 2 (attached to
Proxy
instance)Hardware id notification in wacom’s format
This event notifies the client of a hardware id available on this tool.
The hardware id is a device-specific 64-bit id that provides extra information about the tool in use, beyond the wl_tool.type enumeration. The format of the id is specific to tablets made by Wacom Inc. For example, the hardware id of a Wacom Grip Pen (a stylus) is 0x802.
This event is sent in the initial burst of events before the wp_tablet_tool.done event.
Parameters: - hardware_id_hi (ArgumentType.Uint) – the hardware id, most significant bits
- hardware_id_lo (ArgumentType.Uint) – the hardware id, least significant bits
-
capability
(capability)¶ Event – opcode 3 (attached to
Proxy
instance)Tool capability notification
This event notifies the client of any capabilities of this tool, beyond the main set of x/y axes and tip up/down detection.
One event is sent for each extra capability available on this tool.
This event is sent in the initial burst of events before the wp_tablet_tool.done event.
Parameters: capability (ArgumentType.Uint) – the capability
-
done
()¶ Event – opcode 4 (attached to
Proxy
instance)Tool description events sequence complete
This event signals the end of the initial burst of descriptive events. A client may consider the static description of the tool to be complete and finalize initialization of the tool.
-
removed
()¶ Event – opcode 5 (attached to
Proxy
instance)Tool removed
This event is sent when the tool is removed from the system and will send no further events. Should the physical tool come back into proximity later, a new wp_tablet_tool object will be created.
It is compositor-dependent when a tool is removed. A compositor may remove a tool on proximity out, tablet removal or any other reason. A compositor may also keep a tool alive until shutdown.
If the tool is currently in proximity, a proximity_out event will be sent before the removed event. See wp_tablet_tool.proximity_out for the handling of any buttons logically down.
When this event is received, the client must wp_tablet_tool.destroy the object.
-
proximity_in
(serial, tablet, surface)¶ Event – opcode 6 (attached to
Proxy
instance)Proximity in event
Notification that this tool is focused on a certain surface.
This event can be received when the tool has moved from one surface to another, or when the tool has come back into proximity above the surface.
If any button is logically down when the tool comes into proximity, the respective button event is sent after the proximity_in event but within the same frame as the proximity_in event.
Parameters: - serial (ArgumentType.Uint) –
- tablet (
ZwpTabletV2
) – The tablet the tool is in proximity of - surface (
WlSurface
) – The current surface the tablet tool is over
-
proximity_out
()¶ Event – opcode 7 (attached to
Proxy
instance)Proximity out event
Notification that this tool has either left proximity, or is no longer focused on a certain surface.
When the tablet tool leaves proximity of the tablet, button release events are sent for each button that was held down at the time of leaving proximity. These events are sent before the proximity_out event but within the same wp_tablet.frame.
If the tool stays within proximity of the tablet, but the focus changes from one surface to another, a button release event may not be sent until the button is actually released or the tool leaves the proximity of the tablet.
-
down
(serial)¶ Event – opcode 8 (attached to
Proxy
instance)Tablet tool is making contact
Sent whenever the tablet tool comes in contact with the surface of the tablet.
If the tool is already in contact with the tablet when entering the input region, the client owning said region will receive a wp_tablet.proximity_in event, followed by a wp_tablet.down event and a wp_tablet.frame event.
Note that this event describes logical contact, not physical contact. On some devices, a compositor may not consider a tool in logical contact until a minimum physical pressure threshold is exceeded.
Parameters: serial (ArgumentType.Uint) –
-
up
()¶ Event – opcode 9 (attached to
Proxy
instance)Tablet tool is no longer making contact
Sent whenever the tablet tool stops making contact with the surface of the tablet, or when the tablet tool moves out of the input region and the compositor grab (if any) is dismissed.
If the tablet tool moves out of the input region while in contact with the surface of the tablet and the compositor does not have an ongoing grab on the surface, the client owning said region will receive a wp_tablet.up event, followed by a wp_tablet.proximity_out event and a wp_tablet.frame event. If the compositor has an ongoing grab on this device, this event sequence is sent whenever the grab is dismissed in the future.
Note that this event describes logical contact, not physical contact. On some devices, a compositor may not consider a tool out of logical contact until physical pressure falls below a specific threshold.
-
motion
(x, y)¶ Event – opcode 10 (attached to
Proxy
instance)Motion event
Sent whenever a tablet tool moves.
Parameters: - x (ArgumentType.Fixed) – surface-local x coordinate
- y (ArgumentType.Fixed) – surface-local y coordinate
-
pressure
(pressure)¶ Event – opcode 11 (attached to
Proxy
instance)Pressure change event
Sent whenever the pressure axis on a tool changes. The value of this event is normalized to a value between 0 and 65535.
Note that pressure may be nonzero even when a tool is not in logical contact. See the down and up events for more details.
Parameters: pressure (ArgumentType.Uint) – The current pressure value
-
distance
(distance)¶ Event – opcode 12 (attached to
Proxy
instance)Distance change event
Sent whenever the distance axis on a tool changes. The value of this event is normalized to a value between 0 and 65535.
Note that distance may be nonzero even when a tool is not in logical contact. See the down and up events for more details.
Parameters: distance (ArgumentType.Uint) – The current distance value
-
tilt
(tilt_x, tilt_y)¶ Event – opcode 13 (attached to
Proxy
instance)Tilt change event
Sent whenever one or both of the tilt axes on a tool change. Each tilt value is in degrees, relative to the z-axis of the tablet. The angle is positive when the top of a tool tilts along the positive x or y axis.
Parameters: - tilt_x (ArgumentType.Fixed) – The current value of the X tilt axis
- tilt_y (ArgumentType.Fixed) – The current value of the Y tilt axis
-
rotation
(degrees)¶ Event – opcode 14 (attached to
Proxy
instance)Z-rotation change event
Sent whenever the z-rotation axis on the tool changes. The rotation value is in degrees clockwise from the tool’s logical neutral position.
Parameters: degrees (ArgumentType.Fixed) – The current rotation of the Z axis
-
slider
(position)¶ Event – opcode 15 (attached to
Proxy
instance)Slider position change event
Sent whenever the slider position on the tool changes. The value is normalized between -65535 and 65535, with 0 as the logical neutral position of the slider.
The slider is available on e.g. the Wacom Airbrush tool.
Parameters: position (ArgumentType.Int) – The current position of slider
-
wheel
(degrees, clicks)¶ Event – opcode 16 (attached to
Proxy
instance)Wheel delta event
Sent whenever the wheel on the tool emits an event. This event contains two values for the same axis change. The degrees value is in the same orientation as the
WlPointer.vertical_scroll()
axis. The clicks value is in discrete logical clicks of the mouse wheel. This value may be zero if the movement of the wheel was less than one logical click.Clients should choose either value and avoid mixing degrees and clicks. The compositor may accumulate values smaller than a logical click and emulate click events when a certain threshold is met. Thus, wl_tablet_tool.wheel events with non-zero clicks values may have different degrees values.
Parameters: - degrees (ArgumentType.Fixed) – The wheel delta in degrees
- clicks (ArgumentType.Int) – The wheel delta in discrete clicks
Event – opcode 17 (attached to
Proxy
instance)Button event
Sent whenever a button on the tool is pressed or released.
If a button is held down when the tool moves in or out of proximity, button events are generated by the compositor. See wp_tablet_tool.proximity_in and wp_tablet_tool.proximity_out for details.
Parameters: - serial (ArgumentType.Uint) –
- button (ArgumentType.Uint) – The button whose state has changed
- state (ArgumentType.Uint) – Whether the button was pressed or released
-
frame
(time)¶ Event – opcode 18 (attached to
Proxy
instance)Frame event
Marks the end of a series of axis and/or button updates from the tablet. The Wayland protocol requires axis updates to be sent sequentially, however all events within a frame should be considered one hardware event.
Parameters: time (ArgumentType.Uint) – The time of the event with millisecond granularity
-
ZwpTabletPadStripV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletPadStripV2
¶ Pad strip
A linear interaction area, such as the strips found in Wacom Cintiq models.
Events on a strip are logically grouped by the wl_tablet_pad_strip.frame event.
-
set_feedback
(description, serial)¶ Request – opcode 0 (attached to
Resource
instance)Set compositor feedback
Requests the compositor to use the provided feedback string associated with this strip. This request should be issued immediately after a wp_tablet_pad_group.mode_switch event from the corresponding group is received, or whenever the strip is mapped to a different action. See wp_tablet_pad_group.mode_switch for more details.
Clients are encouraged to provide context-aware descriptions for the actions associated with the strip, and compositors may use this information to offer visual feedback about the button layout (eg. on- screen displays).
The provided string ‘description’ is a UTF-8 encoded string to be associated with this ring, and is considered user-visible; general internationalization rules apply.
The serial argument will be that of the last wp_tablet_pad_group.mode_switch event received for the group of this strip. Requests providing other serials than the most recent one will be ignored.
Parameters: - description (ArgumentType.String) – strip description
- serial (ArgumentType.Uint) – serial of the mode switch event
-
destroy
()¶ Request – opcode 1 (attached to
Resource
instance)Destroy the strip object
This destroys the client’s resource for this strip object.
-
source
(source)¶ Event – opcode 0 (attached to
Proxy
instance)Strip event source
Source information for strip events.
This event does not occur on its own. It is sent before a wp_tablet_pad_strip.frame event and carries the source information for all events within that frame.
The source specifies how this event was generated. If the source is wp_tablet_pad_strip.source.finger, a wp_tablet_pad_strip.stop event will be sent when the user lifts their finger off the device.
This event is optional. If the source is unknown for an interaction, no event is sent.
Parameters: source (ArgumentType.Uint) – the event source
-
position
(position)¶ Event – opcode 1 (attached to
Proxy
instance)Position changed
Sent whenever the position on a strip changes.
The position is normalized to a range of [0, 65535], the 0-value represents the top-most and/or left-most position of the strip in the pad’s current rotation.
Parameters: position (ArgumentType.Uint) – the current position
-
stop
()¶ Event – opcode 2 (attached to
Proxy
instance)Interaction stopped
Stop notification for strip events.
For some wp_tablet_pad_strip.source types, a wp_tablet_pad_strip.stop event is sent to notify a client that the interaction with the strip has terminated. This enables the client to implement kinetic scrolling. See the wp_tablet_pad_strip.source documentation for information on when this event may be generated.
Any wp_tablet_pad_strip.position events with the same source after this event should be considered as the start of a new interaction.
-
frame
(time)¶ Event – opcode 3 (attached to
Proxy
instance)End of a strip event sequence
Indicates the end of a set of events that represent one logical hardware strip event. A client is expected to accumulate the data in all events within the frame before proceeding.
All wp_tablet_pad_strip events before a wp_tablet_pad_strip.frame event belong logically together. For example, on termination of a finger interaction on a strip the compositor will send a wp_tablet_pad_strip.source event, a wp_tablet_pad_strip.stop event and a wp_tablet_pad_strip.frame event.
A wp_tablet_pad_strip.frame event is sent for every logical event group, even if the group only contains a single wp_tablet_pad_strip event. Specifically, a client may get a sequence: position, frame, position, frame, etc.
Parameters: time (ArgumentType.Uint) – timestamp with millisecond granularity
-
ZwpTabletV2¶
-
class
pywayland.protocol.tablet_unstable_v2.
ZwpTabletV2
¶ Graphics tablet device
The wp_tablet interface represents one graphics tablet device. The tablet interface itself does not generate events; all events are generated by wp_tablet_tool objects when in proximity above a tablet.
A tablet has a number of static characteristics, e.g. device name and pid/vid. These capabilities are sent in an event sequence after the wp_tablet_seat.tablet_added event. This initial event sequence is terminated by a wp_tablet.done event.
-
destroy
()¶ Request – opcode 0 (attached to
Resource
instance)Destroy the tablet object
This destroys the client’s resource for this tablet object.
-
name
(name)¶ Event – opcode 0 (attached to
Proxy
instance)Tablet device name
This event is sent in the initial burst of events before the wp_tablet.done event.
Parameters: name (ArgumentType.String) – the device name
-
id
(vid, pid)¶ Event – opcode 1 (attached to
Proxy
instance)Tablet device usb vendor/product id
This event is sent in the initial burst of events before the wp_tablet.done event.
Parameters: - vid (ArgumentType.Uint) – USB vendor id
- pid (ArgumentType.Uint) – USB product id
-
path
(path)¶ Event – opcode 2 (attached to
Proxy
instance)Path to the device
A system-specific device path that indicates which device is behind this wp_tablet. This information may be used to gather additional information about the device, e.g. through libwacom.
A device may have more than one device path. If so, multiple wp_tablet.path events are sent. A device may be emulated and not have a device path, and in that case this event will not be sent.
The format of the path is unspecified, it may be a device node, a sysfs path, or some other identifier. It is up to the client to identify the string provided.
This event is sent in the initial burst of events before the wp_tablet.done event.
Parameters: path (ArgumentType.String) – path to local device
-
done
()¶ Event – opcode 3 (attached to
Proxy
instance)Tablet description events sequence complete
This event is sent immediately to signal the end of the initial burst of descriptive events. A client may consider the static description of the tablet to be complete and finalize initialization of the tablet.
-
removed
()¶ Event – opcode 4 (attached to
Proxy
instance)Tablet removed event
Sent when the tablet has been removed from the system. When a tablet is removed, some tools may be removed.
When this event is received, the client must wp_tablet.destroy the object.
-